Fuel Sending Unit for Boat Tank 14"(360mm) Fuel Tank Sender Stainless Steel Fuel Gauge Sending Unit Marine Fuel Sender Fuel Level Sending Unit RV Tank Sensor for Car Truck Vehicle 240-33 ohm

Sucicago Fuel Gauge Sender Unit Is Much More Accurate and Reliable Than The Old Arm and Float Setup. Customer Can Purchase in Conjunction with a Sucicago Fuel Level Gauge or Water Level Gauge. They're Designed to Monitor The Fuel, Diesel,Gasoline or Water Level In The Tank. This Fuel Sender Will Also Work with Any Fuel/Water level Gauge with Signal Range American Standard output 240-33 ohm. Body Material : Stainless Steel Cable: PVC NBR.Gasket: 1pc Metric Stainless Steel Screws: 5pcs Mounting Methods: Standard SAE 5 hole pattern. Protection Rank: IP67. Output Signal:240-33 ohms. Resolution Range: 10mm for the length: 4”,5”,6”,7” 21mm for the length of : 8”,9”,10”,11”,12”,13”,14”,15”,16”,17”,18”,19”,20” Package Information: 1 x Sucicago Fuel Sender 4 x of Quick Wiring Terminals 1 x Gasket 5 x M5*0.8 Length(16mm) Screws 1x Sending Unit Installation Note： It's suggested That The Customer Do Bench Test For The Sucicago Fuel Sender Before installation to Ensure It Work Fine..There Are Two Types Of Senders: 240-33 Ohms And 0-190 OhmsThe 240-33 Ohms Type Will Present A Resistance Of 240 Ohms Between The Signal And Ground Wire When EMPTY (Float At The Bottom) And 33 Ohms When FULL (Float At The Top).The 0-190 Ohms Type Will Present A Resistance Of 0 Ohms Between The Signal And Ground Wire When EMPTY (Float At The Bottom) And 190 Ohms When FULL (Float At The Top).The 240-33 Ohms Type Fuel Sender Can Only Work With 240-33 Ohms Type Fuel Gauge.If You Buy A 0-190ohms Type Fuel Sender To Work With 240-33 Ohms Type Fuel Gauge. This Gauge ill “Reading Backwards” .So, Before You Buy, See If Your Old (Broken) Sender Is Sending 'Some' Kind Resistance And Try To Figure Out What Type You Need.

• <b>[Perfect Replacement Fuel Sender ］</b> Sucicago Reed Switch Diesel Fuel Water Level Sensor is a Better Option Than the Traditional Lever Type Sensors. <b>The Boat Fuel Tank Will not Effected by The Constant Movement Caused by Waves and Boat Rocking. </b> It Will give an Accurate Indication of Fuel Level and the Fuel Gauge No Longer Bounces All Over The Place In Windy Wave Situations.<br>
• <b>[A Good Resolution ］</b>We Received Feedback From Customers Who Said the Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do.Our R&D Has Redesigned :10mm Resolution Range : 4”,5”,6”,7”. 21mm Resolution Range: 8”,9”,10”,11”,12”,13”,14”,15”,16,17”,18”,19,20”.The Sucicago Fuel Sender Gives A Nice Smooth Gauge Reading.<br>
• <b>[Stainless Steel Stem And Flange］</b>Well Built And Sealed, SAE 5 Hole Mounting Pattern ( NOT Equidistant ).Note the Hole Pattern On The Sucicago Marine Fuel Sending Unit Is Not Evenly Spaced. And There Is Only One Way to Allign the Gasket.<br>
• <b>［15 Minutes To Remove The Old One And Install The New One. ］</b>Easily Understood Wiring Instructions,1pc of NBR Gasket(1pc), 5pcs of SUS M5 Mounting Screws,4pcs of Quick Wiring Terminals. Includes Everything You Need In The Package To Make The Replacement With Ease. You will know how much Fuel, Diesel,Gasoline or Water left on Your boat/Truck/Camper! Signal Output: 240 ohms-33 ohms<br>
• <b>［Really Important to Know BEFORE You Order］</b> 1) To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1" less Than The Depth of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth of The Tank If Tank is Metal . 2)The Diameter of Float is 1.38"(35mm). If You Have to Drill The Hole, Diameter 1.50"(38mm) Hole Would be Perfect.Sucicago Fuel Senders are not linear.<br>